probe stations photomask, microscopes manipulators holders, tips systems laser, Probing Solutions, Inc.

Picoprobe High Performance Microwave Probes
Picoprobes are the industry's premier microwave probing standard for probe tips. Ranging from 1GHz to Telecommunications and Phased Array Radar frequencies at 70-120GHz, all picoprobes offer a large variety of probe tips, sizes, and form factors to select from. Consult PSI Applications Engineering or request a spec sheet on the specific probe selected for detailed probe tip selection.

For more Pico Probe Products, contact our factory directly.

Product Name: MODEL PP7 PROBE HOLDER
Quantity:    Price:   $297.00
Description:   Designed as a IC Circuit line driver to inject signals. To be used in conjunction with PPModels, PP12C or PP18B to measure frequency response in adjacent circuit nodes. Supplied with a 6 foot (1.8 Meters) Coaxial cable with 50 Ohm termination to avoid undesirable frequency reflections. Using Tungsten Probe Tips can minimize capacitive coupling between circuits.

Product Name: MODEL PP7A PROBE HOLDER
Quantity:    Price:   $297.00
Description:   An unterminated 7 version that may be used for capacitive and resistive measurements in low to medium speed signal applications where a 50 Ohm termination is not required. Comes with a 6 foot (1.8 Meter) Coaxial cable. When used for low capacitance applications the cable should be reduced to a 3 foot (1 Meter). If a shorter cable is desired, the product must be specified as PP7A-3 at the time of order.

Product Name: MODEL PP10 PROBE HOLDER
Quantity:    Price:   $1,299.00
Description:   DC to 10 GHz High Speed Multipurpose Passive Probe that can be used for driving as well as receiving signals, have replaceable Coaxial Probe Tips and a 50 Ohm Coaxial cable with a BNC connector. A 250 Ohm Probe Tip should be used with 0.180 inch long dual probe points to achieve DC to 10 GHz response. The signal will be attenuated by 5:1.

Product Name: MODEL PP12C PROBE HOLDER
Quantity:    Price:   $1,299.00
Description:   An ACTIVE High Speed, High Impedance probe used for measuring internal voltage nodes of Integrated Circuits. The input is 1 megohm shunted by 0.1pf, the Rise/Fall times are 0.8 ns. When used with High Impedance Oscilloscopes signal attenuation is 10:1 and with a 50 Ohm input signal attenuation is 20:1 Good for High Speed Bipolar, NMOS or CMOS , -10V to +20V Probing and will withstand large input over voltages. NOTE: Requires a PPPS-V1 Power Supply. Each PS supports two (2) Probes.

Product Name: MODEL PP18C PROBE HOLDER
Quantity:    Price:   $1,999.00
Description:   DC to 350 MHz Low input Capacitance (0.02pf) and Low Input Current (10 /-14A), allows probing and characterization of the most sensitive High Speed MOS dynamic circuits nodes. The difference in these two probes is MODEL PP18B operating Voltage is 0V to 15VDC. MODEL PP19 operating Voltage is -7V to +8V. Both have +5% Gain Accuracy and Signal attenuation Oscilloscope 10:1 or 50 Ohm input 20:1. Both utilize the PP10 Disposable Probe Tips with a Target Size range selectable from 3um to 50 um. NOTE: Requires a PPPS-V1 Power Supply. Each PS supports two (2) Probes.

Product Name: MODEL PP19C PROBE HOLDER
Quantity:    Price:   $1,999.00
Description:   DC to 350 MHz Low input Capacitance (0.02pf) and Low Input Current (10 /-14A), allows probing and characterization of the most sensitive High Speed MOS dynamic circuits nodes. The difference in these two probes is MODEL PP18B operating Voltage is 0V to 15VDC MODEL PP19 operating Voltage is -7V to +8V. Both have +5% Gain Accuracy and Signal attenuation Oscilloscope 10:1 or 50 Ohm input 20:1. Both utilize the PP10 Disposable Probe Tips with a Target Size range selectable from 3um to 50 um. NOTE: Requires a PPPS-V1 Power Supply. Each PS supports two (2) Probes.

Product Name: MODEL PP28 PROBE HOLDER
Quantity:    Price:   $3,599.00
Description:   DC to 1GHz. For High speed submicron MOS circuits, Extremely Low Input Capacitance (0.04pf) Low DC Current drain MODEL PP28 operating voltage -3V to +10V DC. MODEL PP29 operating voltage -7V to +6V DC. Both models have +3% Gain Accuracy and Signal attenuation of 20 to 1. NOTE: Requires a PPPS-V1 Power Supply. Each PS supports two (2) Probes.

Product Name: MODEL PP29 PROBE HOLDER
Quantity:    Price:   $3,599.00
Description:   DC to 1GHz. For High speed submicron MOS circuits, Extremely Low Input Capacitance (0.04pf) Low DC Current drain MODEL PP28 operating voltage -3V to +10V DC. MODEL PP29 operating voltage -7V to +6V DC. Both models have +3% Gain Accuracy and Signal attenuation of 20 to 1. NOTE: Requires a PPPS-V1 Power Supply. Each PS supports two (2) Probes.

Product Name: MODEL PP34A PROBE HEAD
Quantity:    Price:   $4,550.00
Description:   DC to 3 GHz. Combines full DC capability, rise and fall times of 120 ps, 10 Megohm Input Impedance shunted by 0.1 pf and 20 to 1 Signal Attenuation with a 50 Ohm Oscilloscope input. NOTE: Requires a PPPS-V1 Power Supply. Each PS supports two (2) Probes.

Product Name: PowerSupply PPPS-V1 POWER SUPPLIER
Quantity:    Price:   $625.00
Description:   The Pico Probe Power Supply is required for all active Pico Probes. This Power Supply will support two ( 2ea ) active probes at the same time. Required for 12C, 18B, 19, 28, 29 and 34A Probe Models. PP50A (DC to 50GHz), PP75 (50GHz to 75 Ghz), PP90 (60 Ghz to 90GHz), PP110H (DC to 110GHz). Are available on special request for Price and availability directly from Probing Solutions Sales.

DVT30-1MM GigaProbe Kit

We are now offering GigaProbes and Accessories as part of our extensive Signal Integrity product offerings. We continue to service your overall needs and process requirements with both our Signal Integrity line up of Systems and Accessories. Probing Solutions Inc. strives continually to be the leading edge supplier of Signal Integrity processing Products and Systems. Include us in your process requirement and Probing Solutions Inc. will co-configure a system for your specific requirements. Probing Solutions Inc. will assist in making your project less difficult and most importantly, the highest level of success incorporating the performance of our systems and accessories.

KIT INCLUDES

2 Ea. 30Ghz 100 ohm differential/ 50 ohm TDR passive probe

1 Ea. Stainless Steel Tweezers for fine pitch adjustments of probe tips

1Ea. Desk-Top Macro-lenses Inspection Station

1Ea. Custom anodized SMA wrench with Quick Calibrators for 1 0.5mm, 1mm & 2mm pitch adjustment (patent pending)

2 Ea. Hand probe sleeve adapters with EZ-Hold foam cushions for sleeve adaptors

4 Ea. SMA Elbow connectors for easy routing of TDR Instrument cables.

1 Ea. Signal integrity Resource CD (application notes)

1 Ea. PCB Cleaner stick

2 Ea. Probe cable ties

1Ea. 50 ohm conversion kit for two probes

1 Ea. Manual with Signal Integrity app notes

Gold Plated Conductive Diamonds Tip options $500 is (recommended) Cables Not Included with Kit. For more information please contact us.

BACK

Copyright 2004 by Probing Solutions, Inc.
Web design by Global Studio, an advertising agency.
Please send web site inquiries to info@globalstudio.com